← Free Work at Height Training
Module H3 · Free · ~32 minutes
Fall Protection Plan Developer
Nobody falls off a plan — they fall off the part nobody assessed. Written for the competent person appointed under Construction Regulation 10(1): how to assess a worksite for work at height and write the fall protection plan an inspector will actually ask for.
Built on SAQA unit standard 229994
Assess a worksite for work at height and prepare a fall protection plan
NQF level 4 · 3 credits · South Africa · OHS Act 85 of 1993 and Construction Regulations 2014, Regulation 10
What you'll learn
- ✓Regulation 10 clause by clause, and the definitions that decide what applies (fall risk position, prevention, arrest, competent person)
- ✓The fall risk assessment — identify, analyse, evaluate, control — who does it and what it must contain
- ✓Fall prevention for people, equipment and materials, and the safe work procedures around it
- ✓Shock load, fall factors and anchor loads with a worked example a planner can defend
- ✓The inspection, testing and maintenance regime the plan has to provide for
- ✓The twelve-section anatomy of a fall protection plan, and all five parts Regulation 10(2) requires
- ✓Roof work under Regulation 10(5), medical fitness, incident reporting (OHS Act s24, GAR 8 & 9) and training records
Run it as real training — get the free module pack
The pack turns this video into recorded training you can show an auditor. It includes:
- •20-question knowledge test with the trainer answer key
- •Toolbox-talk one-pager
- •Attendance register — your training evidence
Get the Work at Height Module H3 pack (knowledge test, toolbox talk & attendance register)
Free, instant download. We'll only email you the occasional practical quality update — no spam, unsubscribe anytime.
The paperwork behind the training · $29
Work at Height Compliance Pack
Training records are one requirement of Construction Regulation 10 — there are four more. This pack is the rest of the file:
- •Fall Protection Plan Template — 12 sections covering all five parts Regulation 10(2) requires
- •Fall Risk Assessment (Excel) — live 5×5 scoring before and after controls, with a worked roof-work example, rating guidance and a task library
- •Rescue Plan Template — who goes, with what, and how fast
- •Fall Protection Equipment Register (Excel) — every item, its standard and interval, with next-due dates and a status that turns red on its own
- •Harness & equipment pre-use inspection sheet, fall clearance worksheet and lifeline installation checklist
Knowledge-level training aligned to the SAQA unit standard shown. It supports, but does not replace, accredited training and practical assessment by a registered assessor, the Annexure 3 medical certificate of fitness, or the site-specific fall protection plan required by Construction Regulation 10. It awards no credits and does not authorise anyone to work at height, install fall arrest systems, perform rescue or sign a fall protection plan. Qlause is not an accredited training provider. Verify current requirements with your accredited provider and your competent person — SAQA registration and enrolment dates for these unit standards move during the QCTO transition.